14
Smilies
The Aeolos is a resistant breathing chamber with a one-way valve and is used for the effective administration of inhaled medications.
Using the Aeolos significantly reduces the amount of medication deposited in the oral cavity and throat and achieves even greater absorption of the medication by the lungs.
The Aeolos thanks to its small size and inhalation control technology it is your ideal ally in the management of asthma.
1. Before each use, a visual check should be made inside the breathing chamber. If any defect is found, the device must be replaced.
2. Remove the cap from the inhaler, shake it well and insert it into the breathing chamber.
3. Apply the mask to the face and make sure there will be no losses during inhalation.
4. Press the inhaler, taking care that the patient inhales slowly. If the sound of the whistle is heard, then inhalation should be done at a slower rate. During inhalation, the inhalation indicator moves towards the patient as he inhales normally.
5. The mask should remain applied to the patient's face for 5-6 breaths with the administration of one spray.
1. Remove the back part of the breathing chamber.
2. Immerse all parts of the breathing chamber in lukewarm water and mild detergent solution. WARNING! Avoid rubbing the parts of the breathing chamber with any cloth or sponge.
3. Rinse the parts of the breathing chamber with clean water. Or remove all parts of the breathing chamber and place them on the top shelf of the dishwasher (up to 70oC) in an upright position.
4. Place the parts of the breathing chamber in an upright position on a dry surface to dry. WARNING! Avoid drying the parts of the breathing chamber with any cloth or cleaning paper.
5. Before reassembling the chamber, make sure all parts are dry.
* The breathing chamber should be replaced after one year of use.
