15
Smilies
The Aeolos is a resistant inhalation chamber with a one-way valve and is used for the effective administration of inhaled medications.
Using the Aeolos significantly reduces the amount of medication deposited in the oral cavity and throat and achieves even greater absorption of the medication by the lungs.
The Aeolos thanks to its small size and the inhalation control technology it implements is your ideal ally in managing asthma.
1. Before each use, a visual check should be made inside the inhalation chamber. If any defect is found, the device must be replaced.
2. Remove the cap from the metered dose inhaler, shake it well and insert it into the inhalation chamber.
3. Apply the mask to the face and make sure there will be no losses during inhalation.
4. Press the metered dose inhaler inhaler while ensuring the patient inhales slowly. If the sound of the whistle is heard, then the inhalation should be done at a slower rate. During inhalation, the inhalation indicator moves towards the patient as he inhales normally.
5. The mask should remain applied to the patient's face for 5-6 inhalations with the administration of one spray.
1. Remove the back part of the inhalation chamber.
2. Immerse all parts of the inhalation chamber in lukewarm water and mild detergent solution. ATTENTION! Avoid rubbing the parts of the inhalation chamber with any cloth or sponge.
3. Rinse the parts of the inhalation chamber with clean water. Or remove all parts of the inhalation chamber and place them on the top rack of the dishwasher (up to 70o C) in an upright position.
4. Place the parts of the inhalation chamber in a vertical position on a dry surface to dry. ATTENTION! Avoid drying the parts of the inhalation chamber with any cloth or cleaning paper.
5. Before reassembling the chamber, make sure all parts are dry.
* The inhalation chamber should be replaced after one year of use.
